LAMINATED GLASS
JEN-H series NMP recycling machine (Dow Chemical)
ZCB Series Combined Runner Dehumidifier Guizhou Kai Phosphorus 40%RH
In the process of reducing the production of chemical fertilizers, it is possible to avoid the agglomeration of chemical fertilizers during production and storage by reducing the humidity.
Most fertilizers contain water-soluble salt,which have been proven to be effective in supplying mineral nutrients to crops.All fertilizer materials are directly affected by water and can interact with moisture in the atmosphere which usually result in undesirable results such as caking or physical breakdown. Therefore,it is essential to control humidity levels in the production,storage and packaging process of chemical fertilizer.
Glass industry
The transparent thin plastic sheet in the safety glass interlayer is extremely hygroscopic. Films that have absorbed moisture will produce bubbles or degumming during the production process. Therefore, strict control of relative humidity is very important in this process.
Safety glass Lamination
The thin,Transparent adhesive plastic film between layers of safety glass is quite hygroscopic.If exposed in a humid environment,after absorbing moisture the film will boil it off in processing,creating steam bubbles which get trapped in laminated glass. Desiccant dehumidifiers can create low-humidity environments for the manufacturing and storage of laminated glass.
Steel Radial Tires
There are steel cords inside the rubber tires. The purpose of dehumidification is to avoid the corrosion of the cords due to moisture in the air.
Therefore, in the production process of radial tires, there are strict requirements on the temperature and humidity of the workshop, the air humidity is large, the surface of the steel wire may be condensed, and the tires are scrapped after the cords are corroded.
The quality of radial tires is particularly sensitive to the manufacturing conditions. In the calendaring,cutting and curing workshop of all steel radial tire factories, the temperature is maintained at 22 ℃ and the relative humidity is usually kept below 50%RH, if not, the steel cord will rust or cannot bond with rubber. Therefore,it is critical that belt wire not be exposed to moisture to avoid breakdown in adhesion and quality.
Dow Chemical (China) Investment Company Limited
Intex Glass (Xiamen) Co Ltd
Taiwan Glass Group
CSG Holding Co., Ltd.
Bridgestone Group
Shandong Linglong Tire Co.,Ltd
Triangle Tyre Co., Ltd
Guangzhou Wanli Tire
Ansteel Bekaert Tire (Cord) Co., Ltd.
JEN-H series NMP recycling machine (Dow Chemical)
ZCB Series Combined Runner Dehumidifier Guizhou Kai Phosphorus 40%RH
In the process of reducing the production of chemical fertilizers, it is possible to avoid the agglomeration of chemical fertilizers during production and storage by reducing the humidity.
Most fertilizers contain water-soluble salt,which have been proven to be effective in supplying mineral nutrients to crops.All fertilizer materials are directly affected by water and can interact with moisture in the atmosphere which usually result in undesirable results such as caking or physical breakdown. Therefore,it is essential to control humidity levels in the production,storage and packaging process of chemical fertilizer.
Glass industry
The transparent thin plastic sheet in the safety glass interlayer is extremely hygroscopic. Films that have absorbed moisture will produce bubbles or degumming during the production process. Therefore, strict control of relative humidity is very important in this process.
Safety glass Lamination
The thin,Transparent adhesive plastic film between layers of safety glass is quite hygroscopic.If exposed in a humid environment,after absorbing moisture the film will boil it off in processing,creating steam bubbles which get trapped in laminated glass. Desiccant dehumidifiers can create low-humidity environments for the manufacturing and storage of laminated glass.
Steel Radial Tires
There are steel cords inside the rubber tires. The purpose of dehumidification is to avoid the corrosion of the cords due to moisture in the air.
Therefore, in the production process of radial tires, there are strict requirements on the temperature and humidity of the workshop, the air humidity is large, the surface of the steel wire may be condensed, and the tires are scrapped after the cords are corroded.
The quality of radial tires is particularly sensitive to the manufacturing conditions. In the calendaring,cutting and curing workshop of all steel radial tire factories, the temperature is maintained at 22 ℃ and the relative humidity is usually kept below 50%RH, if not, the steel cord will rust or cannot bond with rubber. Therefore,it is critical that belt wire not be exposed to moisture to avoid breakdown in adhesion and quality.
Dow Chemical (China) Investment Company Limited
Intex Glass (Xiamen) Co Ltd
Taiwan Glass Group
CSG Holding Co., Ltd.
Bridgestone Group
Shandong Linglong Tire Co.,Ltd
Triangle Tyre Co., Ltd
Guangzhou Wanli Tire
Ansteel Bekaert Tire (Cord) Co., Ltd.
